A wedding band setlist is built backwards from the running order of the day. Fix the moments the couple has asked for, such as the first dance and the last song. Then fill each dance set with songs most of the room knows, ordered so the tempo climbs. Plan about 15 songs for every hour you play, plus a handful of spares.

The steps below are for whoever writes the list in your band. They work for any function gig, but a wedding gives the setlist the most jobs to do, so that is the example throughout.

Start with the running order of the day

Before you pick a song, get the times from the couple, the planner or the venue: when the evening guests arrive, when the first dance happens, when food is served and when the music has to stop. Many venues have a fixed curfew, and some have a sound limiter that cuts the power to the stage when the band gets too loud. Both change what you can play and when.

Each part of the night asks for something different from the band.

Part of the nightWhat the room needsWhat to play
Drinks or dinner, if you are booked for itMusic people can talk overQuieter, mid-tempo songs. Save the big singalongs for later
First danceA moment for the coupleTheir song, live or from the original recording, as agreed beforehand
First dance setAll ages on the floor earlyWell-known songs from several decades, upbeat from the first bar
BreakTime for food and the barA playlist through the PA, agreed with the couple
Second dance setThe peak of the nightYour strongest songs and the biggest singalongs
Last songEveryone togetherOne song the whole room can sing

Write the times next to each part. If the second set has to finish at 11:45 because the venue closes at midnight, the list should say so.

Work out how many songs you need

Count four minutes per song. That covers a song of three and a half minutes plus the few seconds it takes to start the next one, which makes an hour of playing about 15 songs.

A booking of two one-hour sets needs around 30 songs. Three 40-minute sets need the same 30, split into tens. Add eight to ten spares, and a full night takes a working list of about 40.

Only count songs that the line-up on that date can play. If a dep (a stand-in player, or sub) is covering bass, build the list from what the dep knows. Our guide to the band schedule covers how to arrange deps before you need one.

Order each set so the floor keeps moving

The order matters as much as the choice of songs. These rules hold up at most weddings:

  • Open each set with a song everyone recognises within five seconds. A slow start gives people a reason to stay at the bar.
  • Group songs into runs of three or four and play each run without stopping. Write the BPM beside every title and the runs become easy to see, because songs at a similar tempo sit well together. A big jump in tempo is a good place for a few words from the singer.
  • Let the tempo climb through the set, with one dip. A single slower song about two-thirds of the way in gives dancers a breather. Two ballads in a row empty the floor.
  • Spread the load. Keep the three hardest vocals apart, and check where the guitarist needs a capo or the keyboard player needs a different sound. Those changes take time, so place them where a pause is welcome.
  • End the first set on a high, so people come back after the break. End the night on the song the couple chose, or on one the whole room can sing.

Requests, the first dance and the do-not-play list

Decide your request policy before the couple asks. A workable rule is the first dance plus two requests, sent at least a month before the wedding, so there is time to learn them properly. Put the rule in your booking confirmation.

For the first dance, confirm four things: the exact version, whether you play it live or from the recording, how long it should last, and who gives the cue to start. Ask about the length in particular. Plenty of couples would rather not dance alone for five minutes.

Ask for a do-not-play list as well. It takes the couple two minutes, and it keeps you away from the one song they cannot stand.

Keep spares and agree who calls the changes

The list is a plan for a room you have not seen yet. Keep eight to ten proven songs at the bottom of the page as spares, in keys and tempos that slot in anywhere. When the floor thins out, you skip ahead or swap one in.

Mark the songs that have to be played whatever happens, such as the requests and the last song. Then agree who calls a change on stage. One person decides and the rest of the band watches for the signal. A setlist changed by committee in the middle of a gig produces long silences.

Write it so the whole band can read it

A list of titles is enough for the singer. Everyone else needs more: the key you play each song in, the tempo, who starts it, and anything unusual about your arrangement.

#SongKeyBPMStartsNotes
1SuperstitionEbm100DrumsDrums alone, riff comes in on the nod
2SeptemberA126Count-inStraight in from song 1
3Mr. BrightsideDb148GuitarSinger talks over the intro
SpareYour safest floor-fillerFits anywhere in the set

The keys and tempos in this example are those of the original recordings. Write down the key your own band plays each song in.

Then make sure there is only one version of the list. A setlist that lives in a group chat gets edited in the replies, and somebody prints the old one.

This is one of the things we built Bandop for. Every song in your repertoire is stored with its BPM, your notes and the sheet music as a PDF, and you build each setlist from that repertoire. The whole band opens the same list in the app.

Common questions

How many songs does a wedding band need?

For two hours of playing, about 30 songs plus eight to ten spares. Bands that play weddings regularly keep adding to that, so they can vary the sets from one wedding to the next and take a request without a panic.

Should the band play the first dance live?

Ask the couple and go with their answer. Some want the recording they know by heart. If they want it live, agree the key and the length, and send them a phone recording from rehearsal so there are no surprises on the day.

What do we play during the break?

A playlist through your PA, agreed with the couple in advance. Check at the booking stage whether they expect you to provide it, and whether the venue or a DJ takes over after your last set.